Comelz SS20 Computerized Skiving Machine

Comelz SS20 Computerized Skiving Machine

SS20 Computerized Skiving Machine

The SS20 was born from the accurate application of modern mechanical and electronic technology. It represents a major departure from the traditional skiving machine. The computer installed in the SS20 has made it possible to introduce some unique features. The machine, in fact, is constantly monitored, it adjusts itself automatically and stays perfectly efficient while in operation. All functions are performed by mechanical units driven by independent motors operating under the direct control of the computer. The original structure of mechanical units has made it possible to use a tilting electro-spindle, thus allowing an immediate accessibility to mechanical parts and an easier knife and grindstone replacement. The console can be easily reached and the data displays are very clear. An efficient dust collector is built in the frame of the machine.

KNIFE POSITIONING

The gap between the cutting edge and the presser foot is preset by the operator with micrometric precision. An automatic device enables this gap to be maintained by moving the knife forward as it wears out. This very important automatic device provides for the maintenance of a high level of skiving efficiency and avoids frequent and accurate adjustments.

KNIFE SHARPENING AND GRINDSTONE DRESSING

These two operations, which in traditional machines cause a remarkable loss of time, are automatically performed by the machine, according to the parameters chosen by the operator (pressure, duration and interval). It is also possible to have the machine performing continuous sharpening for special skiving works. The operator can activate and deactivate knife sharpening and grindstone dressing at any time, within his or her own discretion.

WORK-PIECE FEEDING

The feed roller turns, by choice of the operator:

• continuously, at the predetermined speed
• at a variable speed, controlled by a pedal.

In both cases the work feeding speed can be very accurately set and it is not influenced by thickness and toughness of the material being processed. These features make the skiving of workpieces with a complicated outline very easy. A knee operated switch lifts the presser foot to release the workpiece at any moment.

SKIVING

Skiving parameters:

1. - thickness
2. - width
3. - angle
4. - feed speed

… are shown on a display and can be micrometrically adjusted.

The operator adjusts skiving parameters and the data are automatically stored in memory, in the activated section.

There are two scarf width guides:

1. movable
2. fixed.

Both are available at the same time and can also be alternatively used on the same work-piece.
The movable guide allows a fine adjustment of the skive width. It is possible to program its disappearance under the work area to allow the use of the fixed guide.
This guide, positioned under the presser foot near the knife, is perfect for complicated skiving and for work-pieces with very tight curves.
The unavoidable presser foot wear can be compensated directly through the control board of the machine for every scarf at the same time, to guarantee constant skiving quality.

DATA STORAGE

The machine has a memory for 800 different types of skives(100 groups of 8 ) and each one is immediately accessible.
It is sufficient to press a button to recall the required type of skive.
The operator can improve or modify the current skive parameters configuration at any time. The new adjustment is stored in memory, replacing the former data.

WORK-PIECE PROCESSING WITH DIFFERENT SKIVES

For work-pieces which profile requires different skiving styles, it is possible to program the skives in sequence.
The operator has only to recall on the sequence display the required types of skive in the correct order. Afterwards, just a slight pressure on the pedal will make the machine shift from one configuration to the next.

It is also possible to store these sequences in memory, making use of the ample and versatile memory of the machine.

Shenzhen Oyea Machinery Co., Ltd.
Add:No. 2008 , Shennan Road , Futian District, Shenzhen
518026, ChinaTel:+86-0769-88014625
Phone Number:+86-18823852826
Email: oyea1688@gmail.com  
             1659590865@qq.com
Facebook：www.facebook.com/ShenzhenOyea/
Youtube:www.youtube.com/channel/UCG01XsHeFvToKBaAZxEqEcAWeb: www.china-oyea.com

comelz CM44,comelz CM55,comelz P55,comelz 44S

CM44

KNIFE CUTTING FOR LEATHER AND SYNTHETIC MATERIALS

CONTINUOUS NESTING 2 CUTTING HEADS INDEPENDENT REMOVAL WORK AREA SYNTHETIC MATERIALS LINK TO CAD TECHNICAL SPECIFICATIONS The knife cutting technology eliminates the cost of cutting dies while taking advantage of a direct connection to CAD systems to immediately begin production. To compete with die-cutting press productivity CM44 adopts a structure with two cutting heads and a conveyor belt which organizes the flow of operations through three separate areas: piece nesting, nested piece cutting, and cut piece removal.

CONTINUOUS NESTING Without pause or change of workplace, the operator maintains full focus and concentration on nesting the pieces on the leather carried by the conveyor belt. 2 CUTTING HEADS In a compact area served by a powerful local vacuum system, two cutting heads share the work for maximum optimization of operations. Tool change is viable thanks to the complete rotation of the cutting heads, which feature an oscillating knife, marking pen, 4 cutting-dies and punch revolver located in a convenient and visible frontal position. INDEPENDENT REMOVAL The rear table collects large amounts of cut leather enabling the removal of cut leather without constant attention. WORK AREAOn a single work area, bright and ergonomic, piece shapes are positioned and projected by a laser beam that is always sharp on any type or color of leather.  With the coordination of the conveyor belt, skins as wide as 1,5m and unlimited length can be fed, positioned and cut in sequence under full control of the operator.

SYNTHETIC MATERIALS For synthetic materials, in one or more layers, the automatic nesting function can perform fast piece positioning. Therefore, the cutting heads are well exploited and the operator, freed from nesting operations, can fully focus on the collection of the cut pieces.

LINK TO CADThe direct transfer of patterns from CALIGOLA or other CAD systems (in DXF or HPGL exchange format) allows the user to start production immediately, communicating by means of any data support, local area network (LAN), or internet. TECHNICAL SPECIFICATIONS Work area width: 1500 mm Work area length: Unlimited Number of cutting heads: 2 Cutting speed (max): 2 x 50 m/min Punching frequency (max): 2 x 300 holes/min Resolution: 0,025 mm Power supply (three-phase+neutral): 400 V - 50Hz Power consumption (max): 10 KW Pneumatic supply: 7 bar Net weight: 1700 kg Height: 1680 mm Width: 2000 mm Length: 3240 mm

CM55

KNIFE CUTTING FOR LARGE SKINS AND WIDE MATERIALS

TELESCOPIC HEADS NESTING-CUTTING AREA WIDE SKINS AND LARGE MATERIALS ADVANCED SOFTWARE TECNICAL SPECIFICATIONS The structure of the Comelz CM machines with conveyor belt and two cutting heads guarantees high productivity due to its simultaneous nesting, cutting and removing capability. In CM55, the continuity between nesting and cutting makes processing of large skins and large pieces easier.

TELESCOPIC HEADS On CM55, two telescopic heads with extra arm extension operate on a wide and deep area, shared with the nesting. This unique solution allows full visibility and control of the entire work area without interfering with the shapes displayed by the two laser projectors.

NESTING-CUTTING AREA This single nesting-cutting area, measuring 2 x 1.5 m, overcomes the limitations of conveyor belt systems with consecutive and separated nesting areas, creating the conditions for a real continuous nesting for pieces of any size.

WIDE SKINS AND LARGE MATERIALS Skins and materials of unlimited length are processed without interruptions using interactive or automatic nesting, while side pockets allow to cut even skins over 2 m wide. ADVANCED SOFTWARE The control software provides sophisticated functions which optimize speed and quality of the processing and also includes a practical editor for CAD patterns, even in DXF format. TECHNICAL SPECIFICATIONS Work area width: 2000 mm Work area length: Unlimited Number of cutting heads: 2 Cutting speed (max): 2 x 50 m/min Punching frequency (max): 2 x 300 holes/min Resolution: 0,025 mm Power supply (three-phase+neutral): 400 V - 50Hz Power consumption (max): 18 KW Pneumatic supply: 7 bar Net weight: 2400 kg Height: 1815 mm Width: 2880 mm Length: 3400 mm

CM44S

KNIFE CUTTING FOR INSOLES AND SOLES

CONVEYOR BELT 2 INDEPENDENT CUTTING HEADS UNIVERSAL AUTOMATIC LOADER AUTOMATIC AND MANUAL NESTING TECHNICAL SPECIFICATIONS CM44S is a high productivity system. Without cutting dies it can cut insoles, heel seats, soles, toe puffs, counters on cellulose material, cellolose material with reinforced strip (and/or foam and/or textile), fiber-board, leather, neolite, regenerated leather, salpa, thermoplastic, etc. CM44 has two cutting heads with oscillating knife and a conveyor belt.

CONVEYOR BELT The conveyor belt allows for the parallel execution of automatic material loading, piece cutting, and piece recollecting phases. The cutting heads can work without interruptions in a highly productive cycle. 2 INDEPENDENT CUTTING HEADS Fast and robust, the cutting heads have an oscillating knife and a marking pen. They work independently from each other on an area 1500mm wide and unlimited depth, optimizing the cutting speed and the material consumption.

UNIVERSAL AUTOMATIC LOADER The loader is equipped with multiple clamping devices (18 needles and 18 suction cups) that are individually software activated, a motorized sheet centering system, and a sheet movement system controlled by 5 brushless motors. It can load every sheet of material used in the insole or sole production and it is compatible with roll feeding.

AUTOMATIC AND MANUAL NESTING Patterns imported from CALIGOLA or even from other CAD systems (in dxf exchange format) are automatically nested. It is also possible to perform a manual nesting using a bright laser projector (to nest irregularly shaped materials like scraps of sheets or leather). TECHNICAL SPECIFICATIONS Work area width: 1500 mm Work area length: unlimited Material maximum thickness: 8 mm Number of cutting heads: 2 Cutting speed (max): 2 x 50 m/min Resolution: 0,025 mm Power supply (three-phase+neutral): 400 V - 50Hz Power consumption (max): 10 KW Pneumatic supply: 7 bar Net weight: 2100 kg Height: 1690 mm Width: 2130 mm Length: 3300 mm

P55

PUNCH CUTTING FOR PATTERNS AND INSOLES

INDEPENDENT SOFTWARE GREAT VARIETY OF MATERIALS MULTI-TOOL HEAD WITH FAST CHANGE SYSTEM TECHNICAL SPECIFICATIONS P55 exploits the strength of punch cutting through an exclusive bridge structure with independent and synchronized mobile carriages. This original solution eliminates length limitations of the cutting area and allows a continuous and productive work cycle: no cuts to remove waste material, piece removal by fall and with the possibility to cut sheets with unlimited length or in rolls. P55 is therefore an “automatic” punching machine that eliminates dead time and does not require constant presence of the operator to remove pieces and waste or for frequent loading of the material.

INDEPENDENT SOFTWARE The machine software GPWin imports pattern data (in DXF or CMZ format), handling work orders and nesting optimization independently of the CAD.

GREAT VARIETY OF MATERIALS Because of its versatility and productivity, P55 is suitable for various contexts, from series development for pattern making to samples and small-medium production of insoles. P55 cuts in single or multiple layers a great variety of materials including cardboard, fibreboard, various plastic materials and all rigid materials for insoles.

MULTI-TOOL HEAD WITH FAST CHANGE SYSTEMThe oscillating units of punch and micro punch (optional, for the smallest details) are manufactured with special high-resistance and light materials. They have a fast and easily accessible tool change system, an opening for materials up to 8 mm thick and a pen for texts and marks. TECHNICAL SPECIFICATIONS Material width (max): 800 mm Material length (max): Unlimited Cutting speed (max): 6600 mm/min Power supply: Single-phase 240V Net weight: 650 Kg Weight with crate: 735 Kg Height : 1280 mm Width : 1340 mm Depth: 1150 mm

Comelz Knives / Comelz Blades / Leather Cutting Knives / Tungsten Carbide Comelz Knives

If you have more questions to know ,please contact us . 

Tel:+86-0769-88014625

Phone Number:+86-18823852826     

Email: oyea1688@gmail.com  

             1659590865@qq.com

Web: www.china-oyea.com

We warmly welcome every customer to send us drawings for making customized product.  

Contact with us ,you will get more than what you can !      
****Comelz Punching Tools

comelz CM44

CM44

KNIFE CUTTING FOR LEATHER AND SYNTHETIC MATERIALS

CONTINUOUS NESTING 2 CUTTING HEADS INDEPENDENT REMOVAL WORK AREA SYNTHETIC MATERIALS LINK TO CAD TECHNICAL SPECIFICATIONS The knife cutting technology eliminates the cost of cutting dies while taking advantage of a direct connection to CAD systems to immediately begin production. To compete with die-cutting press productivity CM44 adopts a structure with two cutting heads and a conveyor belt which organizes the flow of operations through three separate areas: piece nesting, nested piece cutting, and cut piece removal.

CONTINUOUS NESTING Without pause or change of workplace, the operator maintains full focus and concentration on nesting the pieces on the leather carried by the conveyor belt. 2 CUTTING HEADS In a compact area served by a powerful local vacuum system, two cutting heads share the work for maximum optimization of operations. Tool change is viable thanks to the complete rotation of the cutting heads, which feature an oscillating knife, marking pen, 4 cutting-dies and punch revolver located in a convenient and visible frontal position. INDEPENDENT REMOVAL The rear table collects large amounts of cut leather enabling the removal of cut leather without constant attention. WORK AREAOn a single work area, bright and ergonomic, piece shapes are positioned and projected by a laser beam that is always sharp on any type or color of leather.  With the coordination of the conveyor belt, skins as wide as 1,5m and unlimited length can be fed, positioned and cut in sequence under full control of the operator.

SYNTHETIC MATERIALS For synthetic materials, in one or more layers, the automatic nesting function can perform fast piece positioning. Therefore, the cutting heads are well exploited and the operator, freed from nesting operations, can fully focus on the collection of the cut pieces.

LINK TO CADThe direct transfer of patterns from CALIGOLA or other CAD systems (in DXF or HPGL exchange format) allows the user to start production immediately, communicating by means of any data support, local area network (LAN), or internet. TECHNICAL SPECIFICATIONS Work area width: 1500 mm Work area length: Unlimited Number of cutting heads: 2 Cutting speed (max): 2 x 50 m/min Punching frequency (max): 2 x 300 holes/min Resolution: 0,025 mm Power supply (three-phase+neutral): 400 V - 50Hz Power consumption (max): 10 KW Pneumatic supply: 7 bar Net weight: 1700 kg Height: 1680 mm Width: 2000 mm Length: 3240 mm

Shenzhen Oyea Machinery Co., Ltd.
Add:No. 2008 , Shennan Road , Futian District, Shenzhen
518026, ChinaTel:+86-0769-88014625
Phone Number:+86-18823852826
Email: oyea1688@gmail.com  
             1659590865@qq.com
Facebook：www.facebook.com/ShenzhenOyea/
Youtube:www.youtube.com/channel/UCG01XsHeFvToKBaAZxEqEcA
Web: www.china-oyea.com

Wild knives(TA30/TA40/TA41/TA400/TA500)

Wild TA30/TA40/TA41/TA400/TA500 knives

type W1

30/45 degr., wide, single edge, for reflective materials incl. Diamond Grade, cardboard and Polyester films

for TA410/TA510 series

type W2

30/30 degr., wide, dual edge,  solid carbide blade for cutting paper, fabrics etc.

type W3

30/35 degr., wide, single edge,robust carbide blade for cutting cardboard,Polyester, Leather etc.

type W4

30/30 degr., wide, single edge,solid carbide blade for cuttingreflective materials up to high intensity,fabric,cardboard and Polyester

type W5-S

30/50 degr., dual edge, for all common 

self-adhesive vinyls, films, pattern materials, narrow wedge angle and steeper cutting angle for thicker materials incl. reflectives
 type W5

30/30 degr., dual edge, for all common self-adhesive vinyls, films, pattern materials, narrow

 type W6

26/54 degr., single edge,for thick stencils,rubber sandblast materials etc.

 type W7

40/30 degr., dual edge, for all common 

self-adhesive vinyls, films, pattern material, strong, long lasting blade
type W8

30/40 degr., single edge, for thicker vinylsreflectives, pattern material and thin stencilsnarrower wedge angle for cutting thicker materials

type W9

40/40 degr., single edge, for all common self-adhesive vinyls, films, pattern materials, great for very small lettering

OYEA Knives manufactures and supplies a full line of both STANDARD and CUSTOM leather cutting knives and blades. All of our standard leather cutting knives are manufactured to exceed the exact OEM standards.  
       

If you have more questions to know ,please contact us . 

Tel:+86-0769-88014625

Phone Number:+86-18823852826     

Email: oyea1688@gmail.com  

             1659590865@qq.com

Web: www.china-oyea.com

We warmly welcome every customer to send us drawings for making customized product.  

Contact with us ,you will get more than what you can !  

***Wild Ta10/TA20 knives;Wild TA30/TA40/TA41/TA400/TA500 knives;Flat knives for WILD “UTH” Universal Tool Head